Home Agriculture Farming The technique of raising frogs is not known to everyone

The technique of raising frogs is not known to everyone

0
44
Raising frogs for maximum efficiency

Welcome to AgriSearch, your trusted source for all things related to agriculture. Today, we will explore the unconventional yet highly effective method of raising frogs in cement tanks. This innovative approach offers numerous advantages, including the ability to optimize space, mitigate disease risks, and facilitate easy harvest due to the frogs’ aversion to burrowing into the mud. Our goal at AgriSearch is to share this lesser-known technique with individuals in areas interested in scaling up meat frog farming.

Building a Cement Tank for Frog Farming

When constructing a cement tank for frog farming, it is crucial to choose a cool and quiet location. Frogs are shy creatures that are easily frightened by collisions, so it’s best to keep the tank separate from noise and disturbances. Consider planting trees or using a plastic net to filter sunlight, while still allowing natural light to enter.

Create a rectangular tank with a surface area ranging from 6 to 10 square meters, surrounded by walls measuring 1.2 to 1.5 meters in height. Divide the tank into multiple adjacent cells, ensuring there is a convenient path for caretaking and nurturing in the center.

Frog pond

To protect the rearing area, use a wire mesh as a barrier to prevent theft and keep out predators such as snakes, mice, and owls.

The tank’s bottom should be covered with cement at a 3-5% incline towards the drainage pipe. This design facilitates frequent water changes during the rearing process.

Inside the tank, consider incorporating rafts made of bamboo, cork, or wood. These rafts should be positioned about 15-20cm higher than the bottom to provide spaces for the frogs to rest and bask in the light. Place a plastic pipe that matches the drain’s diameter at the designated drainage location, ensuring proper water flow from the inside to the outside. This pipe should have small drainage holes at the bottom. Create a seal on the outside water discharge surface, allowing for easy water changes by simply opening the cover.

Treating a Newly Built Water Tank

After filling the tank with water, use 5g/m3 of potassium permanganate to decontaminate the cement. After 15 to 20 days, drain all the water and clean the tank again. Next, refill the tank with water to a height of approximately 40 to 50cm. Add table salt at a rate of 20-30g per 1m2 of water. After 2 days, remove this water and replace it with clean water. Once the tank is prepared, it is time to introduce the newly acquired frogs.

Frog pond treatment

To maintain optimal water conditions, ensure that the pH level stays between 6.5 and 7.

Maintain a water temperature ranging from 22 to 28 degrees Celsius.

Keep the water at a depth of approximately 30cm.

The Importance of Frog Culture Media

When raising frogs, it is essential to provide suitable substrates within the tank. Consider incorporating items such as water hyacinth, duckweed, plastic sheets, or perforated nylon sheets. These materials offer beneficial shelter and food sources for the frogs, reducing the likelihood of them jumping ashore in search of sustenance. However, remember that the area covered by the media should not exceed one-third to one-half of the frog rearing system.

Frog culture media

Selecting the Ideal Frog Breed Prior to Release

Choose frogs

Prioritize selecting large, strong, and evenly sized frogs for your breeding population. Look for active and agile individuals with bright and sharp colors. Avoid choosing frogs with deformities or irregularities.

Before releasing the frogs into the tank, ensure that the temperature is cooler than 30 degrees Celsius. To transport the frogs, consider using bamboo baskets, bamboo baskets lined with nylon, or boxes, bags, or cloth with a small amount of duckweed and seaweed.

.

Frequently Asked Questions

1. How should I build a cement tank to raise frogs?

To build a cement tank for raising frogs, you need to choose a cool location. It should be quiet, separate, and away from noise. The tank should be rectangular with an area of 6-10m2 and a surrounding wall height of 1.2-1.5m. Multiple adjacent cells should be created, with a convenient path in the middle for care and nurturing.

2. How should I treat a newly built water tank for frog farming?

After pumping water into the tank, you should use 5g/m3 of potassium permanganate to de-water the cement. After 15 to 20 days, drain all the water and clean the tank again. Then, pump water about 40 to 50cm high into the tank and add table salt at a rate of 20-30g/1m2 of water. After 2 days, remove this water and replace it with clean water. You can release the new frogs into the tank at this time.

3. What should I consider when choosing a frog breed for raising?

When choosing a frog breed, look for large, strong, and evenly sized animals. They should be active and agile, with bright and sharp colors. Avoid selecting frogs with deformities. Additionally, observe cooler temperatures below 30 degrees before releasing the frogs. During transportation, use bamboo baskets, boxes, or cloth with a little duckweed and seaweed.

NO COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here